Double Rack indirect setup

jimsbarbecue

Moderator
Staff member
Just another use for the drum. The pan used is a 20 quart,the insert I think are 16 and 9. I just find what fits best when at the store. The tabs are 2 inches long. It fits on the higher basket mount. I have run the drum at 250 and both racks are the same temp within a few degrees.
the height is 8 inches just like the top shelf.

IMG_4909-X2.jpg


IMG_4896-X2.jpg


IMG_4899-X2.jpg


IMG_4903-X2.jpg


IMG_4902-X2.jpg


This shows the 20 with a 16 in it and a 9 upside down

IMG_4905-X2.jpg


Foiling needs to be neat underneath so it doesn't effect air flow

IMG_4906-X2.jpg


The bottom rack sets on the pan.

IMG_4907-X2.jpg
 

jimsbarbecue

Moderator
Staff member
On my 18 WSM I use a 1/2 inch thick aluminum round between the two pans on this set up I used the 9 upside down. It all evens out temps on the rack and gives support to the foil .
 
Top Bottom