DrumSmoking.com
Pellet Smoking Big Poppa Smokers
The West Coast Offense
Ole Hickory • Ace BP •
If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)
Results 1 to 7 of 7

Thread: If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)

  1. #1
    Junior Member
    Join Date
    Sep 2016
    Posts
    4

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)

    I've been researching UDS's and the BPS kit specifically for a few months on and off, trying to figure out if I had the time to source a drum and deal with the burn-out, drilling, and painting effort (and I'm in the city so the burn could be a problem). Finally decided that life is short and on the time vs. money spectrum I have less of the former, so I pulled the trigger.

    Just got my Big Poppa Smokers kit + stainless drum from Bubba's Barrels. Arrived on Friday and I assembled Saturday morning... what a beauty!

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-6-17-jpg

    (This was "Used drum", "drill it for me", "I need a kit" options)

    Misc feedback on the kit:

    • Generally it rocks!
    • all the hardware is good quality stainless, no missing parts
    • nice wood handles
    • directions were reasonable, but geared mostly toward the drilling vs. assembly... still pretty easy to put together.
    • One exception was the backing of the vent slides, they were not bent to the radius of the drum so I had to do that by hand and as a result are not quite tight to the side. Also, that makes it so the slides are not smooth. I think I can bang it into shape but will take a bit of work/time.
    • it would be good to recommend some form of casters/dolly, I've got this on order: Amazon.com: Milwaukee Hand Trucks 40146 55-Gallon Drum Dolly: Home Improvement


    and drum:

    • Generally super happy!
    • shipped quickly - ordered Sunday the 18th, arrived (from TN to ME) on Friday the 23rd.
    • arrived wrapped in plastic but otherwise no external box or protection
    • 1 big dent in the side (see pics) but otherwise super nice, way better than expected for a "used drum"
    • Note I was able to pound out the dent w/a rubber mallet fairly easily and I'm likely not to notice it anymore, so no real harm done.
    • BPS kit was basically all loosely dropped inside the barrel, no real packing at all.... it's all SS so it was basically OK but made me concerned at first. I'd suggest maybe strapping it down to the bottom of the barrel or something, rather than just letting it roll around
    • Holes were all well drilled and lined up with 1 exception - the holes for the flared tips of the backing for the vent slides were too close in and i had to bend them out to fit. Not a functional problem, and I almost wonder if it was intentional to make them "pop out" a bit, but meh.
    • I gave it a good wash w/soapy water, banged out the dent, and ready to assemble.
    • No need to really burn-in, but did a kickoff/seasoning burn anyway just to be safe (but see below about "bailing" half way and cooking...)



    So... after assembly, I was planning to just do an initial seasoning burn, and loaded about 1/2 full basket of briquettes and filled a center well w/maybe a dozen from the weber chimney starter. After the bad smoke cleared in about 30mins, let it ride around 325 for a couple hrs and all was looking great. Took a peek and realizing there was still 1/2 of that 1/2 basket left, decided to go ahead and throw dinner on there - bone-in chicken breasts and some fresh brats. About 1.5hrs later the chicken was fantastic:

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-12-17-jpg

    and I still had enough burn to do a round of vegetables (pepper + onion skewers, mushrooms, and asparagus). So I have no doubts that a full basket will last a good 8+ hrs at a lower burn (250F or so).


    Today I stoked it up again w/a full basket. Took a good hour or so for me to get the temp dialed in around 250-275, but I'm sure I'll get the hang of it, and since then has been very steady. Ribs are underway, I'll post a followup on those and some more pics later.

    So far I'm super happy with the drum, the BPS kit, and drum smoking in general. I'd like to thank Bubba's, BPS, and the drumsmoking.com community for all the help and insights as I kick off a new hobby/skill/obsession. I'm looking forward to stepping up the game and doing some brisket and pork shoulder soon!

    -b.

  2. #2
    Junior Member
    Join Date
    Sep 2016
    Posts
    4

    More pics

    Knolling the parts after wash:

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-3-17-jpg

    Dent:

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-4-17-jpg

    Last time it will look shiny on the inside:

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-8-17-jpg

    In situ:

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-10-17-jpg

    And post-first-burn ready-for-next:

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-14-17-jpg

  3. #3
    Junior Member
    Join Date
    Sep 2016
    Posts
    4

    Ribs!

    I did a rough 3-2-0.5, and they are falling off the bone massively, so a bit overcooked but waaaaaay better than my prior attempts on the Weber. And they taste fantastic, so...

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-1-5-jpg

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-2-5-jpg

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-4-5-jpg

    If you are on the fence, jump! (New BPS w/SS Bubba's Barrel)-uds-5-5-jpg

  4. #4
    Junior Member
    Join Date
    Jul 2015
    Posts
    23
    I love the look of that stainless! Will be my next one if I ever burn this one out!

  5. #5
    Senior Member
    Join Date
    Aug 2012
    Location
    Lake Stevens, WA
    Posts
    261
    Nice abitrandom! Re: your bottom vents if you decide to remove and re-shape them. Get a cylinder that's smaller than the barrel diameter(I used a scuba tank) and roll the vent back and forth a few times on the cylinder with a little pressure on the two ends to re-shape the curve to match the barrel, and then for the vent slider also. You can look down the edge of the vent just like you would a piece of wood, to see if there are any kinks in the curve and correct if needed. You can easily get a perfect fit for the curve of your barrel that way. When re-installing use high temp. silicone to bed the vent against the barrel for an air tight seal. The high temp. silicone is red and available at any auto parts store. Smoke on!

  6. #6
    Junior Member
    Join Date
    Sep 2016
    Posts
    4
    Thanks for the advice Salmonsmoker!

  7. #7
    Administrator
    Join Date
    Jul 2012
    Posts
    969
    thanks great cook!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •