DrumSmoking.com
Pellet Smoking Big Poppa Smokers
The West Coast Offense
Join Our Email List!
BPS done but lid is bent
Results 1 to 5 of 5

Thread: BPS done but lid is bent

  1. #1
    Junior Member
    Join Date
    May 2015
    Posts
    1

    BPS done but lid is bent

    I purchased a re-conditioned drum which was in great shape but the lid doesn't fit flush on drum. Lid was attached to drum with a band. Could a bent lid be a problem?

  2. #2
    Member DjPorkchop's Avatar
    Join Date
    Mar 2014
    Location
    Marion, IL
    Posts
    59
    It will suck a little air when you try to snuff out your coals maybe but shouldn't be a big deal. Mine is warped a tad and I never had any issues at all.

    Here is a place that sells seals and such. I never dealt with them but have heard others that have. BBQ Smoker Gasket Seals
    If I could I would. If I don't, it's because I am lazy!

  3. #3
    Member
    Join Date
    Sep 2012
    Location
    Bothell, WA
    Posts
    60
    It's likely gotten bent from someone prying the lid off. Set it on a flat surface and see if its got a high side, put a 2x4 or something under it and gently persuade it back into shape.

    As far as the dealing with BBQ Smoker Supply, I have, they are legit with fast service and great quality products.
    Brian
    Left Hand Smoke "Fire it up" Competition BBQ
    PNWBA/KCBS CBJ
    BWS Gater, BGE's, WSM's, Big Drum Smoker clones (85, 55x2, 30 and 15 gallon) BPS Drum, Hunsakers Smokers Vortex Clone can, Pellet Pro 22" WSM conversion, Cookshack 008, Weber Performer/Cajun Bandit, Genesis C, Q200/120, Lodge Hibachi, La Caja China 2

  4. #4
    Senior Member
    Join Date
    Aug 2012
    Location
    Lake Stevens, WA
    Posts
    261
    A lot of open top barrel lids have also been deformed by the band clamp that holds them on. I shaped a piece of oak to fit the grove where the lid gasket goes and using a hammer to drive the block in around the perimeter, reshaped the flattened areas. The lid fits much better, but the high temp. gaskets will be great for gettig a tighter fit. Thanks for posting about BBQ Supply, Swamprb!

  5. #5
    Junior Member
    Join Date
    Aug 2019
    Location
    *оссия
    Posts
    2

    BPS done but lid is bent

    In my opinion you are not right. Let's discuss it. Write to me in PM, we will communicate.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •