PDA

View Full Version : Ginger - BPS REDRUM hits the deck!



swamprb
05-31-2014, 07:59 AM
http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/IMG_1002.jpg (http://s163.photobucket.com/user/swamprb/media/Ugly%20Drum%20Smoker/IMG_1002.jpg.html)

BPS Drum Smoker kit, 55 gallon drum from Al's Drum & Barrel on Airport Way S. in Seattle, WA (call ahead and tell them its for a BBQ and it will be unpainted if you like) Painted with Dupli-Color RED Engine enamel, BBQ Guru adapter added.

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/IMG_1003.jpg (http://s163.photobucket.com/user/swamprb/media/Ugly%20Drum%20Smoker/IMG_1003.jpg.html)

My REDneck ash tray and beefed up charcoal grate.

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/IMG_1004.jpg (http://s163.photobucket.com/user/swamprb/media/Ugly%20Drum%20Smoker/IMG_1004.jpg.html)

But it wouldn't be a swamprb REDRUM without a Red Weber lid!

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/IMG_1005.jpg (http://s163.photobucket.com/user/swamprb/media/Ugly%20Drum%20Smoker/IMG_1005.jpg.html)

Or a Cajun Bandit Reversible WSM/Kettle Rotisserie Ring!

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/IMG_1006.jpg (http://s163.photobucket.com/user/swamprb/media/Ugly%20Drum%20Smoker/IMG_1006.jpg.html)

Go Big or stay home! The Big Ten Inch! Cajun Bandit Stainless steel Stacker Ring adds an extra grate and 10" to the height of the drum!

http://i163.photobucket.com/albums/t310/swamprb/Ugly%20Drum%20Smoker/IMG_1007.jpg (http://s163.photobucket.com/user/swamprb/media/Ugly%20Drum%20Smoker/IMG_1007.jpg.html)

Stay hungry!

Salmonsmoker
06-01-2014, 09:47 AM
Great job Swamp! Al's is where I got my first barrel. If you can find a tall enough collar, you could hang a whole hog in it. :)

BabelBBQ
06-01-2014, 12:49 PM
Does the Weber lid fit without any modification?

Sent from my SCH-I535 using Tapatalk

Salmonsmoker
06-01-2014, 02:48 PM
Babel, I think someone posted on that a ways back. The lid didn't fit the barrel he had so he found a ring (collar) or something that slipped inside his barrel. He had it raised above the top of his drum a bit, drilled and through bolted the collar to the barrel and the Weber lid fit perfectly. You might find it by a search of the forum. That would certainly make it easier to roast a big turkey. I put a second row of support screws below the first set to be able to lower the grill or use two grills at once. That worked well also for doing the turkey.


Sent from my iPhone using Tapatalk

swamprb
06-01-2014, 08:56 PM
Take a look at the 3rd picture-
it shows the collar or "soon to be patented swamprb's Weber kettle lid flange" in the rim of the drum. It's the top of a kettle bowl. I used a cutoff wheel to remove it, used some Rutland stove gasket and Permatex high temp silicone to seal any gaps in the flange. It's removable, and for most open drums, needed to get a good seat for the 22" Weber lid. The lid of my 26.75" Weber OTG fits my 85 gallon drum with out a flange.
Hope this helps!

BabelBBQ
06-02-2014, 04:17 AM
Thanks. I thought it was removed in the picture using a standard lid.

Sent from my SCH-I535 using Tapatalk

scooter
06-06-2014, 07:18 PM
That is way cool!!!

DjPorkchop
06-08-2014, 04:31 PM
Nice! I like it.

I am in the process of building a rotissery add-on for my Drum. Mine won't look near as nice as yours though. ;)