PDA

View Full Version : drum prep



bbqclyde
03-03-2014, 09:25 AM
I am picking up a brand new drum from a supplier here in OKC.
Do i need to get the paint off the outside of the drum before i paint it with the rustoleum high heat paint, or can i just paint over whatever is already on it? I really dont want to have to get some paint remover, etc and spend hours removing the existing paint since its brand new.

BabelBBQ
03-03-2014, 02:45 PM
Yes get it off. I just burned a bunch of wood in the barrel and most of the flaked off. I would do suggest drilling the whole first though. That way you can keep the burn going with the kids on and the paint on the lid can burn of too.

Sent from my SCH-I535 using Tapatalk

DjPorkchop
03-04-2014, 10:20 AM
I would be careful when burning the lid though. Stand by and watch it. When the paint starts flaking, spin and flip it often. It will warp real fast. The longest I have ever let a lid burn for was 30 minutes and it by far has been the worst one for warpage yet. If your lid warps, you will need to get a rope seal or go with the old Tin foil trick.

Good luck. Hope it turns out great!